Send Email/Text Message with Push Notification Board and N-Button

Here are steps for how to have your Push Notification board (get the board from National Control Devices) send Email or text message with N-Button Pro or N-Button Lite.

1. Download and install N-Button Pro or N-Button Lite.

2. Connect your Push Notification board with your computer.

3. Run N-Button Pro/Lite to show N-Button Pro/Lite Manager

4. Add the connected Push Notification  board to Devices Manager.

2015-01-16_16-17-20

5. Add a Scan Channel to show the status of Push Notification board on your desktop.

Add Scann Channel for Push Notification board with N-Button

N-Button Scan Channel

6. The Scan Channel widget will change the status when you push the button of the Push Notification Board.

7. Open N-Button Pro/Lite Manager again. Click Automation to add a Push Notification Contact Closure Rule.

2015-01-16_16-47-48

8. Set the action to Send Email for when Status Changes from Open to Close, or from Close to Open.

2015-01-16_16-52-49

9. After finishing all above settings, you will receive text message once the Push Notification board changes.

Note:

Gmail can not be used in N-Button, since Google no longer supports the third-party access since June 2022. You can use other email.

Here is the setting sample for Hotmail or Outlook.

Automation Setting Hotmail

Another sample:

Automation Email Setting

See Also:

Email to Text Message with N-Button

Send Email/Text Message with N-Button A/D Input Rule

Back to N-Button Pro homepage