Software Solution for Serial Port and Network Control
N-Button creates widgets that float on your desktop to control external devices, send specified data, run applications, send http requests or send data lists. It supports Serial Port/ USB and Network connection between a PC and devices. N-Button v1.5 has […]
N-Button Lite creates up to 16 widgets that float on your desktop to control external devices, send specified data, run applications, send http requests or send data lists. It supports Serial Port/ USB and Network connection between a PC and […]
Using N-Button software, you can create only one button to turn on/off relay in specific time. There are two ways. One is to create a Customized Button -> Send Specified Data. There are timer commands for PorXR relay boards of […]
WiFly module has two modes, data mode and command mode or configuration mode. Upon power up, WiFly module will be in data mode. To enter command mode, exactly the escape sequence (set to three characters, $$$ by default) must be […]
PTZ Controller supports Sony VISCA protocol. It works with Sony cameras. About Preset Position of PTZ Camera, PTZ Controller only supports what the camera supports. Only 6 Preset Positions are supported by Sony’s camera. That’s why you can not save […]
Here are the steps for how to use Comm Operator software to update WiFly module to the latest firmware. 1. Connect WiFly module with your computer. 2. Download, install and run Comm Operator. 3. Open USB Serial Port connecting […]
We have introduced How to Send Commands to Multiple IP Addressed with our N-Button and Comm Operator software. It needs create COP file (data list) with Comm Operator software for each IP address. It’s a good way to send different […]
1. Connect WiFly module with your computer. 2. Download, install and run Comm Operator. 3. Open USB Serial Port connecting with the WiFly module , select Baud Rate (the default is 9600). 4. Set data format to Text and Carriage […]
Comm Operator software makes it easy to configure WiFly wireless module to connect with Wi-Fi network. This video shows how to map wireless module’s serial port to TCP -IP port in network step by step. More information about Comm Operator:http://www.serialporttool.com/CommOpInfo.htm […]
Comm Operator makes it easy to configure WiFly wireless module to connect with Wi-Fi network. It applies to the following modules. WIFLY GSX RN-131G, RN-131C, RN-134, RN-121, RN-123 & RN-125, RN-370 WIFLY EZX RN-171, RN-174, RN-XV Firmware Version 2.32 Here […]